The Turnkey M is a ready-to-use machine for larger components (up to half a meter). It is designed as a workstation that can be operated standing or sitting position. Like the Turnkey S, it has a modular design and can be configured in different versions to suit the workpieces to be welded as well as the customer‘s requirements.
The laser and the control system are located in the lower part of the Turnkey M, so that in the upper part the welding area with clamping unit, motion system, and optics can be optimally accessed. For setting up the welding area can be reached from the large side doors or from the rear door. All the doors are monitored for safety. The electrical cabinet at the rear side of the lower part of Turnkey M is accessible with two small wing doors and is laser-safe seperated from the welding area. The laser itself in the lower part of the machine is accessible through the lower side doors on the left and right. For welding, only the lifting door at the front is opened and closed.
The welding process is set up on the touch screen, which can be tilted according to the height of the operator. A keyboard and mouse can optionally be connected via the USB ports in the operating table.
The drawer for the workpieces and the lifting door can be operated either manually, pneumatically or electrically. The rotary indexing table is available in manual and electric versions. For connection to a local area network (LAN), the Ethernet interface on the back of the Turnkey M can be used to transfer process data to a server or for remote maintenance via the Internet.
Technical Data
Welding area axes 500 x 400 mm ; scanner 350 x 350 m
Laser power 40-200 W
Wavelength about 980 nm
Laser class 1 (red pilot laser 2)
Clamping force up to 7000 N
Drawer manual, pneumatic, or electrical
Rotary table diameter 650mm (manual or electrical)
Lifting door 650 x 400 mm, (manual, pneumatic, or electrical)
Cooling air (IP20, filter mat)
Ambient temperature 35/40 °C – depending on laser power & cycle
Electrical supply 100-240 V, 50/60 Hz, <10 A
Dimensions 880x1200x1950 mm – with drawer
880x1250x1950 mm – with rotary table
with lamp tower 2170mm
Weight about 300kg depending on configuration
Features
Electrical and pneumatic supplies are situated at bottom below electrical cabinet
