For integration in special-purpose machines we offer the same modules separately as you can find in our Turnkey machines. We also provide the necessary support for your internal machine building department or for an external specialist. Laser units and optics are required for any integration. Additionally, we supply clamping units and motion systems.
With all relevant modules coming from ProByLas, they can seamlessy work together of an optimal welding process. The machine building department or an external special machine builder only needs to ensure sufficient enclosure including safety and part handling both in and out of the machine.et.
Laser
The laser unit is the central component of the Modula product family. Besides the laser itself, it also comprises the system control, interfaces, and control elements.
On the touch-screen, the welding process is set up and observed during operation. Optionally a keyboard and mouse can be connected to the USB ports as well as a larger screen to the HDMI port on the backside.
The connections for other Modula components as well as the interface for automation carried out by digital and analog inputs and outputs are located on the backside of the laser unit. The safety controls for emergency stop and two-channel interlock can be configured in different ways allowing integration up to the highest Performance Level e according to EN13849 standard.
TECHNICAL DATA
Laser power 40-200 W (wavelength about 980 nm)
Laser class 4 (red pilot laser 2)
Air cooling Protection class IP20 or IP30, optionally with filter mat
Ambient temperature 35/40 °C – depending on laser power, type of air cooling, and duty cycle
Electrical supply 100-240 V, 50/60 Hz, <10 A
Connectivity Ethernet RJ45 on back side
Dimensions 520 x 430/530 x 215 mm; depth depending on configuration
